# 2 Pcs on same router... SOLVED

**URL:** <https://battlefieldforum.co/t/2-pcs-on-same-router-solved/102776>\
**Category:** General Discussion\
**Created:** [December 10, 2016, 12:04am UTC](https://battlefieldforum.co/t/2-pcs-on-same-router-solved/102776 "2016-12-10T00:04:00Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![Kajjal](https://battlefieldforum.co/letter_avatar_proxy/v4/letter/k/e9bcb4/32.png) [@Kajjal](https://battlefieldforum.co/u/Kajjal)\
**Post date:** [January 2, 2017, 4:22pm UTC](https://battlefieldforum.co/t/2-pcs-on-same-router-solved/102776/21 "2017-01-02T16:22:00Z")

</div>

> [@Mikex2112](#):
>
> > [@Kajjal](#):
> >
> > > [@PuRePIaY](#):
> > >
> > > Eskha, do you have UPNP enabled? (in the router) If not it might help.
> > > 
> > > I have seen this problem before if I remember right.. you have to give each computer a static IP.. Then add rules for the ports (ALL OF THEM) for EG IF BF1 uses port 220 you have to set one rule for all incoming traffic (on port 220) to go to one computer (192.168.1.85) and the same rule for the the other (192.168.1.86).
> > 
> > This is the most likely cause. Once turned off on the router it will work normally. No need for any changes from routers default config appart from that normally.
> 
> Still wont work properly…You still have 2 PC’s accessing the same ports from the same IP adrress.Most routers cant handle this type of traffic.

Most home routers have no problem with this. It has been standard for a very long time now. They just use NAT and internal DHCP which does not require any config from the user. Adding ports etc. is unnecessary and can cause security issues if you don’t know what you are doing.

[Previous page](https://battlefieldforum.co/t/2-pcs-on-same-router-solved/102776.md?page=1)