What setting do you use ?
Like how much sensitivy ? On the Zoom ?
And solder respons ?
Zoom sensitivity about 85%, deadzone 20%, aim assist off.
Thanks fore the input
turn stick acceleration to 0% asap
Soldier sensitivity 75, zoom sensitivity 100%, uniform aiming On. Deadzone 8 left, 10 right.
And of course
But basically everyone needs to find what works for themselves. It’s try and error.
I think my normal rotation sensitivity is around 35.
100% zoom sensitivity.
Aim acceleration at 0 which is says will mimic the acceleration from BF4
quite a useful video
Nice video - he’s a cool guy with some good tips!
Open your eyes… …to see<
Soldier stick sensitivity 50%
Soldier zoom sensitivity 60%
Stick aim acceleration 100%
1-4x zoom 100%
5-6x zoom 95%
8-10x zoom 85%
Plane control sensitivity 200% 
good clip, he got some realy valid point 's
gonna adjust my game to it this weekend 
thanks now i can compare 
thanks for the input ,
iam trying to fine tune the setup 
this gives more insight
how can transfer some screen shot form the ps4 to pc
You have to be carefull with this.
Turning it Off when 99% has it turned On puts you in a significant disadvantage.
dcs500 has like 23.033 kils , he is in the same platoon with me ..
23.033 plus kills arrent a disadvantage hehehe
Yeah, and about 4 million deaths.
On a serious note I’ve messed around with settings so much I don’t really know what good or bad , and BF1 has so many issues now that game settings are, in my opinion, irrelevant, you’re basically at the mercy of latency and other players ping.
Stick acceleration shouldn’t exist.
Turn down shake scale and motion blurr, too. And vibration.
I have soldier sensitivity at 95.
General zoom sensitivity is at 180 with 125% for everything up to 1.50x zoom.
1.50x and 2.00x are both at 145%, and everything higher is at 110%.
Left deadzones are both at 8 and right deadzone is at 6 and 10 (axial).
My max threshold on the right stick is at 74.
found my topic again ,
the first 3 i have done , other stuf i tryed i can’t get used to it i’m constanly overaming ,
i did it the compleet other way .
@hjm600rr I’ve recently been playing with my settings again, here’s my current settings which feel good at the moment.
Basic;
Soldier stick sensitivity 20%
Vehicle stick sensitivity 20%
Soldier zoom sensitivity 65%
.
Advanced;
Stick acceleration 0%
Centre deadzone 0%
Axial deadzone 25%
Max input 100%
Zoom sensitivity (all) 50%
Uniform soldier aiming OFF
Coefficient 130%
.
Video;
I’ve reduced Field of view right back to 60, previously had it on 90, lower setting sacrifices peripheral vision for greater zoom.
ADS field of view OFF
Motion blur 20%
your video settings using them now
these are mine settings ,
